posted August 08, 2004 08:14 PM
i am running a dw9 2link the car needs more forward bite on slick track.its a short bar rf750 lf650 rr200 on top of housing lr 225in front of housing running 6-7 inch rake on straight long bar 2nd hole up on pinon.60% rear car likes to 3 wheel. also the pullbar is a 700lb spring . any help would be greatful. thanks in advance.
avenger 11 Dirt Forum Racer
Total posts: 88
posted August 08, 2004 10:03 PM
I don't know what your percentages are,but try a 150 on the rr on top of housing.I had the same set-up as you,and it really came around when I went to the 150.
grumps Dirt Roller
Total posts: 6
posted August 09, 2004 08:31 PM
Try a 275 spring on the left rear and stiffen up the pull bar spring to a 1050lbs spring and hang on if this is not enough put the right rear spring behind the rear end.
GOOD LUCK RACER
jrf3 Dirt Full Roller
Total posts: 28
posted August 10, 2004 12:22 PM
I agree with grumps. Put the rt rear 150 spring behind the rearend and loose the short bar on the rt side and go back to the long bar, leave the short bar and the 200spring in the lt rear. Also put the 1050 pull bar spring in. Scale it with 80 - 85 lbs lt rear bite and you'll be fast. Thats what i used to run before I switched to 4-z