Visit The Dirt Forum for More Information

Author Topic:   Short Panhard Tonight
99EMBREY
Dirt Full Roller

Total posts: 71
posted August 07, 2004 09:00 AM  
Just installed 11" end to end panhard bar from left side of pinion. Have never tried this setup before. What height and how much angle should I start with? 3 link chevelle clip with springs on top.

paulickr
Dirt Maniac

Total posts: 110
posted August 09, 2004 05:30 AM  
mine likes about 3-1/2" rake and sometimes i use up to 5.

99EMBREY
Dirt Full Roller

Total posts: 71
posted August 09, 2004 06:41 AM  
We put 2" of angle in it. Will never go back to the long bar. Car was super fast compared to the old setup. Car was a little "darty" over the bumps though. All in all, I like this setup though.

NJantz
Dirt Forum Champ
Total posts: 755
posted August 09, 2004 07:25 AM  
how did the short bar work out?

GRTWallbanger
Dirt Maniac

Total posts: 196
posted August 09, 2004 09:18 AM  
What side of the frame are you running the short bar on?

99EMBREY
Dirt Full Roller

Total posts: 71
posted August 09, 2004 09:59 AM  
Well, lets just say I qualify better than I race!! We qualified 2nd, but ran 9th in the feature after a right front flat caused by contact with another car (my faut). Our bar is hooked to the driver side of pinion to driver side of car. We had trouble with right tierod hitting frame as the car rolled over. We are sprung very soft, I guess I'll try going up in springs this week.

Back to the Archives