Visit The Dirt Forum for More Information

Author Topic:   3 LINK ?
I-B-RACIN
Dirt Maniac

Total posts: 132
posted August 02, 2004 04:48 PM  
I want to get as many thoughts on this as i can. In the process of building new 3 link midwest mod. approx. 360 hp. what would make the best of everything for this. It will be only used on short 1/4 to 3/8 tracks. what i am wondering is spring loction such as front of axle rear, on the trailing arms or mounted to the axle tube. Long pahard behind rear, shorty bar or J-bar.Trailing arm lenght short left long right? trailing arm mounted to the front or bottom of axle tube? What type off pull bar rubber doughnut or spring with or without a control shock. I would like to come up with something a little different for my area. Any feed back would be greatly appreciated. I'v red so much in the archives that i'm gettin comfused about what is the ulltimate design....

zeroracing
Dirt Forum Champ
Total posts: 1875
posted August 02, 2004 04:59 PM  
email me at jls4z3@umr.edu and i will fix you up. with some ideas, and diagrams.

Back to the Archives