Visit The Dirt Forum for More Information

Author Topic:   Running Long Panhard bar - switch to a shorty??
BrianW
Dirt Freak

Total posts: 385
posted August 02, 2004 08:54 AM  
I'm running a long panhard bar which goes from the left side of the frame to the right side of the axle mounted to the rear - it's about 28-30" in length. I've got about 3-3.5" of height difference with the frame end being higher. I noticed that I'm loading up the RR tire more than the LR and was wondering if running a short panhard bar to about the center of the diff will put more load on the LR in a turn and tighten up the car in the corners.

The car seems to be loose mid-turn to exit and just doesn't have the traction coming off the corner to get on the throttle as hard as I need to...

Any help is greatly appreciated in getting this thing to handle!

paulickr
Dirt Maniac

Total posts: 110
posted August 04, 2004 12:32 PM  
once you go to a shorty bar , you wont want anything else. its da bomb man!!!!

BrianW
Dirt Freak

Total posts: 385
posted August 04, 2004 02:20 PM  
Currently my only option is to run one behind the axle - what length is needed? would a 12 or 18" bar work?

HIGHVOLTAGE
Dirt Full Roller

Total posts: 47
posted August 04, 2004 07:16 PM  
Brian just switched to the short panhard bar love it finally getting hook on left rear the other night our left rear tire was hotter than the rr after the feature.We have it mounted to the drivers side of the pinon only in first hole dropped it down to 2nd hole and carried lf tire all the way down straight.Ours is only 9 inches long with two heims .

Back to the Archives