Visit The Dirt Forum for More Information

Author Topic:   new driver have qa
ss#2
Dirt Forum Racer

Total posts: 80
posted July 30, 2004 11:06 PM  
i bought a mod it has three link type rearend
it's got 15" bottom arms,panhard bar is behide rearend mounts driver frame to pass side rearend and is 18" long and on the top of rearend the third link it is a 29"bar no spring
on bar just straight with heims on ends has anyone raced this kind of set up before??will it work have not got motor ready to try and i'm new at this mod class

302JJ
Dirt Roller

Total posts: 20
posted July 30, 2004 11:28 PM  
The solid pull bar works fine for the taky tracks, if you feel alot of wheel spin would get a pullbar with thee rubber boscuits,or spring. The solid bar will just drive the rear tires to the ground hard, and quick when you get back into the throttle.

ss#2
Dirt Forum Racer

Total posts: 80
posted July 30, 2004 11:34 PM  
thanks for reply is the long ph bar ok or do i need to shorten it ??

dirtywrench13
Dirt Freak

Total posts: 324
posted July 31, 2004 07:12 AM  
LEAVE IT LONG,YOU WILL FIND OUT AS YOU LEARN TO TUNE IT, IT CAN MAKE A BIG DIFFERENCE IN THE WAY THE CAR WORKS!

filthy
Dirt Roller

Total posts: 7
posted July 31, 2004 12:13 PM  
start with @ 15 degree angle in the l/r trailing arm, and 10 in the right. also no more than 20 deg. angle in pullbar. this is a good start..

Back to the Archives