Visit The Dirt Forum for More Information

Author Topic:   How to three wheel
sanderson10
Dirt Full Roller

Total posts: 35
posted July 26, 2004 08:09 PM  
Hey guys I know this is a modified board but i'll ask this anyways. I have a WISSOTA Super Stock. It has a three link suspension, can't use coilover shocks, or a torque link, and can't mount springs behind axel tube. I can get practically any angles out of the trailing arms, panhard bar, and pullbar. I was just wondering if anyone has any setups that will get alot of bite out of this kind of suspension? Any input would help. Thanks.

Jason

JT54
Dirt Maniac

Total posts: 170
posted July 27, 2004 05:34 PM  
short link on the left 16* long on the right 12* any where from 15 to 20 degrees on the pull bar ....lots of rear weght ..like 60 percent with driver and about 53 percent left with 53 to 54 cross ....225 left rear in front 175 right rear on top .....this gets it done on my mod ......looks kool but I think its faster with all for on the ground most of the time......have fun.

Back to the Archives