Visit The Dirt Forum for More Information

Author Topic:   jet mod 2 link setups please!!!!!!!!!!!!!!!!!!!
imcamod5
Dirt Full Roller

Total posts: 27
posted July 18, 2004 05:30 PM  
I need some help on setups for dry on Jet cobra 2 link. Thanks

mod70
unregistered Total posts: 27
posted July 18, 2004 10:48 PM           send a private message to imcamod5   Edit/Delete Message   Reply w/QuoteBBBBBB
What you got now, where are you having problems?

imcamod5
Dirt Full Roller

Total posts: 27
posted July 19, 2004 12:04 PM  
52% left, 52.5% cross, 59% rear. Springs are 650 lf, 750 rf, 225 lr, 200 rr. 900 lb at 20 degrees pullbar. J bar middle hole, left bar top hole, right bar middle hole. I need to get more forward bite when dry.

xhubby
Dirt Freak

Total posts: 376
posted July 19, 2004 04:13 PM  
Why not just call the Jet & ask him personally. 402-228-1596.
If John isn't there, ask for Rodney. Hope this helps.

mod70
unregistered Total posts: 376
posted July 19, 2004 07:57 PM           send a private message to xhubby   Edit/Delete Message   Reply w/QuoteBBBBBB
xhubby has the best suggestion. Mine is to go to 200 LR 150 RR & 1/8" preload on the 900# pullbar.

LITTLEMAN
Dirt Maniac

Total posts: 177
posted July 25, 2004 06:22 PM  
You probrably have enough bite in the car,left side needs to be lowered for slick also soften the right front and not the left front go with a 600 lb. spring on the right front when it gets slick.Also soften the pullbar to a 700 this will promote a softer transition of load to the rear tires.also run easy up shocks on the front and softer compression on the rear to get the weight transfered to the rear tires.Remember the car has to get back on the left rear to get forward bite.Hope this helps.

Back to the Archives