Visit The Dirt Forum for More Information

Author Topic:   4 bar zlink setup help
rdirt
Dirt Full Roller

Total posts: 32
posted July 18, 2004 04:01 PM  
2k Harris 4 bar ls z rs,Tight in middle and
loose coming off,need suggestions please.
lf 650 72-2 3 offset
lr 200 spring b/h on slider 95-3 3 off
rf 750 75-3 2off
rr 150 spring on top of housing 73-5
l/s bar angles
upper 20 deg
lower 10 deg
r/s z both set at level
j bar 2nd from bottom on pinion 6 up on frame
no lead in rear
51.5 ls 59 rear 50 cross 30 lbs bite
pull bar 1050 spring 1.5 travel centered
1.5 stagger on pucks
Thinking of droping split in rear 25#
Track is very dry slick (blue) for mains

Thanks Rick

FASTLAP
Dirt Maniac

Total posts: 171
posted July 20, 2004 06:59 PM  
My 4/z acted about the same way (Hassy) with that style setup. Couldn't get it to act right til I bumped up the cross% and about 100# lr. Rear % looks ok, j bar same as I had. This was also for a very slick track. Good luck!

Back to the Archives