Visit The Dirt Forum for More Information

Author Topic:   Forward bite 4 bar
Dirt Full Roller

Total posts: 71
posted July 16, 2004 10:12 AM  
Can any one tell me what I could do to improve forward bite? The car is close, top 5 most of the time. I just seem to not be able to get off the corners, the car will hook up about mid straightaway. 59% rear 51%lf side 65lb split. Thanks.

Dirt Forum Champ
Total posts: 755
posted July 16, 2004 12:30 PM  
Put some more positive angle in the bars. But be prepared because it will make you looser in the middle.

Dirt Forum Champ
Total posts: 2007
posted July 16, 2004 01:08 PM  
what do you have for springs in the car. what kind of angles in your bars.

Wide Open
Dirt Roller

Total posts: 10
posted July 16, 2004 02:43 PM  
Pos. angle in both bars? I was told more pos. in top and more neg. in bottom to increase forward bite. Am I doing this wrong? Springs are clamped in front LR and on top RR. 225 LR and 200 RR. Loose off I too need help.

Dirt Full Roller

Total posts: 65
posted July 16, 2004 03:25 PM  
T/10, you may gain more initial bite by increasing the pull bar angle, depending on where it is now.

Wide Open, on a 4-bar, more upward angle in both bars=more bite. On a z-link upward angle in front bar and downward angle in radius rod=more bite (and rear steer). If you loose off, put more angle in left side.

Back to the Archives