Visit The Dirt Forum for More Information

Author Topic:   brake rotor?
Rat Trap
Dirt Maniac

Total posts: 129
posted July 06, 2004 03:48 AM  
We broke one of our rear brake rotors this weekend. We can not make out the numbers on it to know what it is off of. Its on a 9 in rearend and 4.5 bolt pattern. I'm afraid that may not be enough info, but thats all i have to go on.

sdracer12
Dirt Maniac

Total posts: 180
posted July 06, 2004 08:15 AM  
Not sure if you are talking about a rotor with the mounting hat built all in one, but, we used to run a hobby stock with brake rotors off of a chevy Celebrity fwd. I can't remember for sure, but I think they were the front rotors from a Celebrity wagon, a little heavier duty, approx. 1984-86 model? Bolt pattern was 5 on 4-1/2, same as Ford 9" stock pattern. This rotor is the floating type on the Celebrity; take off the wheel and the caliper and the rotor falls right off. Hope this helps.

[This message has been edited by sdracer12 (edited July 06, 2004).]

racerwilson
Dirt Freak

Total posts: 357
posted July 06, 2004 09:11 PM  
we were using a rear rotor off an 87 camaro non hi performancs. can't remember the number off hand.

Rat Trap
Dirt Maniac

Total posts: 129
posted July 06, 2004 10:59 PM  
Finally found it. Went to one of the old parts stores where the guys behind the counter doesn't have to look at a computor to help you. Took him less then 5 min. and he came back with one off a 86 Full Size FWD Oldsmobile. Fits like a charm and only cost $16. Thanks though

Back to the Archives