Visit The Dirt Forum for More Information

Author Topic:   msd
Dirt Roller

Total posts: 5
posted June 04, 2004 10:10 AM  
installing msd to a ford dura spark, confused, instructions say to remove plug from coil and plug white wire to neg side of plug. question, do I leave original dura spark in car or remove , and if remove where does white wire go. thanks

Dirt Freak

Total posts: 370
posted June 04, 2004 12:06 PM  
just take the white and red wires and put them together, This with duraspark is the ignition power for the box. The duraspark system has a cold start situation that uses the white wire, you don't need that just wire it together with the red wire. . Throw the old duraspark box away. The purple, orange, black *going to the distributor* and the green wire to the negative side of the coil.

Back to the Archives