Visit The Dirt Forum for More Information

Author Topic:   Where to get pullbar brackets for 9"
BrianW
Dirt Freak

Total posts: 385
posted June 03, 2004 09:57 PM  
Having a little difficulty getting my replacement rear axle together - I can't seem to find the correct pullbar brackets - the ones that I need (and were on the old axle) are offset on the center 'pumpkin' section. I got a pair from Speedway and a pair from motorsports of KC (old MWMS) and they're both to be centered over the flat-spot on the top of the Ford 9". The ines I need have one nearly centered on the 'flat' top and the other 'down' and to the left on the rear.

I've checked A&A and a couple other catalogs and can't seem to find these...

Any help is greatly appreciated!

udecide66
Dirt Freak

Total posts: 229
posted June 03, 2004 10:53 PM  
Performance Bodies part # 204041 $29.75 a pair
9" Ford Torque Link Mount offset
1-800-722-4641
Hope this is the one your looking for

#13 mod
Dirt Full Roller

Total posts: 72
posted June 04, 2004 12:28 AM  
I have a set that we made and used this year. I could get you one made if you would like. We also have lots of other brakets and parts that we make for ourselves....that is if you are ever looking for something.

NJantz
Dirt Forum Champ
Total posts: 755
posted June 04, 2004 06:23 AM  
http://www.secureperformanceorder.com/afcostore/getproduct.cfm?CategoryID=14&ClassID=188&SubclassID=902&ProductID=1115
Try www.afcoracing.com if the above link doesn't work and search for torque link bracket. Part #20404-1 are offset.

I have some similar to this, they just have a lot more holes in them. If you want ones with more holes then contact www.teamgrt.com

BrianW
Dirt Freak

Total posts: 385
posted June 04, 2004 08:47 AM  
Thanks all - I found the set at Performance bodies - they seem to be the AFCO brackets. Had them in stock and are shipping them today!


#13 Mod - PM's arent working to you for some reason.. PM me and let me know what brackets you make... I had to order an in-stock set since I really need these to get the car back on the track.

[This message has been edited by BrianW (edited June 04, 2004).]

#13 mod
Dirt Full Roller

Total posts: 72
posted June 04, 2004 02:55 PM  
Not sure about PM, never could get them to work for me either.
Backically I make a verity, whatever we or someone else needs. Right now we have 5 hole 2-link brackets, shock mount off all kinds, brake line tabs, fuel cell mounts, 4bar or 4bar/zlink kits, and pull rod mount. I have bird cages designed but haven't got any of them made up yet. We also have some items for the walls of trailers and an engine block off set. Bacially if I can get an idea of what you need and some dimensions, I'll get the parts design and made no problem.....

Back to the Archives