Visit The Dirt Forum for More Information

Author Topic:   ride height?
21dirtracernw
Dirt Full Roller

Total posts: 29
posted May 18, 2004 08:20 AM  
where do most of you guys set your ride height from and and a general height.

2 link car..

hope this is not to dumb a question.
going to get this thing figured out....

dirtbuster
Dirt Forum Champ
Total posts: 2007
posted May 18, 2004 08:35 AM  
It would depend on who built the car and what they reccomend. WE set our DW car measureing at the front under the dogleg in the frame directly behind the wheels at the lowest point. In the rear we measure below the rectangular tubing that the trailing arm bracket is mounted to. LF 5, RF 5 1/4, RR 5 1/2 LR depends on how much bite we have in the car. Again different brands could be different.

[This message has been edited by dirtbuster (edited May 18, 2004).]

21dirtracernw
Dirt Full Roller

Total posts: 29
posted May 18, 2004 10:35 AM  
its a flexiflyer copy so the factory won't help in this matter..

dirtbuster
Dirt Forum Champ
Total posts: 2007
posted May 18, 2004 10:54 AM  
I see.. well have you tried asking someone familiar with the flexiflyers to see what they start with.

mod70
unregistered Total posts: 2007
posted May 18, 2004 12:34 PM           send a private message to dirtbuster   Edit/Delete Message   Reply w/QuoteBBBBBB
I set my 2 link Hoffman 5.5" left and 6" right.

joeyi
Dirt Roller

Total posts: 20
posted May 19, 2004 04:55 AM  
just try to do it in the same spot on level ground paint a line drill a small hole whatever lol

Back to the Archives