Visit The Dirt Forum for More Information

Author Topic:   set up help for rookie
modracer09
Dirt Full Roller

Total posts: 66
posted May 11, 2004 07:05 PM  
hey guys im new to the mod deal and only drove 1 other season .. i went to our track at practice and it was dry and with the new owners and a old track owner the track was dry and dusty where use to wet to tacky here. what would be a good place to start i got a metric front clip car running monos in rear with a 90/10 shock and a long pullbar they put new clay on track and the top use to be the best way around but they have it almost flat and not the only bankings in the middel to the low side im new the the mods and with my litte racing i got i like a tighter car whats some stagger tire psi and some other info i should use... thanks

MOD75D
Dirt Freak

Total posts: 236
posted May 11, 2004 07:53 PM  
My mono leaf car had
650LF 750RF
200LR 150RR 20LB mono leafs replaced every 6 races but had tuns of forward bite.

WB75 shocks on front
WB94 shocks on rear

7* pinon angle with the rear square.

ride hight was
5 1/2LF 5 3/4 RF
5 3/4LR 6 RR

tire press

8LF 14RF 1" split in front
8LR 10RR 1" split in rear

Hope this helps. I finished 6 in points my rookie year with this setup.


Back to the Archives