Visit The Dirt Forum for More Information

Author Topic:   Loose under braking
XC man
Dirt Full Roller

Total posts: 39
posted May 04, 2004 04:07 PM  
Car is way loose under braking . have guages , bias bar setup for frt to rear , 7 way prop valve plumbed into the RF as well as a shut off for the RF . Any suggestions for a good starting point ?

zeroracing
Dirt Forum Champ
Total posts: 1875
posted May 04, 2004 04:23 PM  
dont run the brake shut off, leave the brake on to tighten the braking. also move the 9010's to the right, and put two on the rearend. add front brake.

XC man
Dirt Full Roller

Total posts: 39
posted May 04, 2004 05:17 PM  
Do you want more front brake for a dryslick track ?

mod70
unregistered Total posts: 39
posted May 04, 2004 05:27 PM           send a private message to XC man   Edit/Delete Message   Reply w/QuoteBBBBBB
I agree with zero, no shut off on RF for dry slick. With RF shut off the LF is going to want to pull you that direction. Try it W/O shut off and move bias front one crank at a time til she settles down. Good luck!

XC man
Dirt Full Roller

Total posts: 39
posted May 04, 2004 06:07 PM  
I have the shut off figured out ., and ran the main on a dryslick track with the prop valve full open . But i was under the assumption that you needed more rear brake when the track dries out ? I have no idea where I dreamed up that one .

Back to the Archives