Visit The Dirt Forum for More Information

Author Topic:   Pushing in loose off?
JAW
Dirt Full Roller

Total posts: 48
posted April 29, 2004 08:22 AM  
Well first like to say thanks for all the help on the Bouncing ? it worked.
My problem is that in the wet track it pushes going in and is loose as soon as he picks up the gas.
It's a 4bar z link right side.
Top link on LR is in bottom hole and the top bar Z on RR is in bottom hole
Bottom rod LR is down 5 deg and RR is level.
225 LR 250 RR.
Pan hard is a short bar in 2nd hole from the bottom on pinion.
We run 10" tires(RC3)hoosiers.
Thanks for any help.

zeroracing
Dirt Forum Champ
Total posts: 1875
posted April 29, 2004 10:46 AM  
well, a number of things
1) is it the driver??? alot of drivers will enter tight, then throw it loose, the tires are broken loose still when they pick up the gas. seen people that have been racing for years do that.
2) lower your rr spring, this will help it out. by lessing the rr spring you will plant it less comparied to the rf, so the car will entry freer(looser) and exit tighter.
3) another fix is more lr bite, this will free up entry and tighten exit, how much do you have now?
4)raise your bottom link to level on the lr
5)raise your rr rearward bar up a hole or two.
6)raise your lr top link a hole or two.
what angles are in your bars right now? put an angle finder on them

Majic Maker
Dirt Full Roller

Total posts: 36
posted April 29, 2004 10:47 AM  
crank lr in the car!!!


JAW
Dirt Full Roller

Total posts: 48
posted April 29, 2004 01:51 PM  
The car is a Bob Pierce 2004.
The top rod on the LR is in the bottom hole
The bottom rod on LR is in the middle
The top RR rod is in the bottom (z link rr)
The bottom RR rod is in the middle
Short panhard bar is in second from the bottom almost even with driveshaft.
LF 800 RF 950
LR 225 RR 250

wheel weights
LF 770 RF 485
LR 815 RR 797

With 10 rims RC3 Hoosiers
LF 90 RF 91
LR 88 RR 92


XC man
Dirt Full Roller

Total posts: 39
posted April 29, 2004 06:37 PM  
Are you sure you dont have your rear springs reversed ? 100 % of all the setups that i have been around calls for softer spring on RR ? Just a thought .looks like you need alot more LR bite also .

fast_crew
Dirt Forum Racer

Total posts: 99
posted April 29, 2004 07:33 PM  
left side and rear look ok but only 45%cross thats alittle on the light side I would say.

rrrrick
Dirt Maniac

Total posts: 192
posted April 30, 2004 11:28 AM  
I think more cross weight is in order if it is tight while you off the throttle

Dirt-Tracker
Dirt Maniac

Total posts: 182
posted May 03, 2004 09:22 PM  
Put the 250 in left and 225 in right....dial in some more left rear bite and let'er fly...

------------------
"Somedays your the dog, and somedays your the fire hydrant!!!"

www.geocities.com/albertson28racing

Back to the Archives