Visit The Dirt Forum for More Information

Author Topic:   clutch
Whitelightning
Dirt Freak

Total posts: 429
posted October 19, 2005 02:04 PM  
How do I figue out what clutch and pressure plate I need for a 4 speed tranny when I go to a parts store like autozone. All I have is the tranny so far so I dont have an old clutch to compare it to. I am also gonna buy a flywheel are thay all the same from 80 s on up

dnswwood
Dirt Roller

Total posts: 8
posted October 30, 2005 07:30 AM  
Assuming you are running a ford 2300

First thing to look at is how many splines are on the input shaft 10 or 23.Then i would check your track rules to see if racing clutches and pressure plates are allowed.If so several places sell 12 to 16 lb clutch flywheel and pressure plate set ups

If you have to go to an auto parts store just tell them you need a clutch ,PP, and flywheel for a ford 2300 and be sure to tell them how many splines are on the transmission input shaft

BIGG C
Dirt Maniac

Total posts: 114
posted November 01, 2005 06:40 PM  
Where can I find a clutch disc to fit a 10 spline Ford with 7 1/2 escort pressure plate and flywheel? BIGG C

bigcityracer
Dirt Freak

Total posts: 431
posted November 01, 2005 07:39 PM  
Look for what you need here! http://www.clutchnet.com/

bigcityracer
Dirt Freak

Total posts: 431
posted November 01, 2005 07:42 PM  
quote:
Originally posted by Whitelightning:
How do I figue out what clutch and pressure plate I need for a 4 speed tranny when I go to a parts store like autozone. All I have is the tranny so far so I dont have an old clutch to compare it to. I am also gonna buy a flywheel are thay all the same from 80 s on up


Look at the spline on the shaft ot the trans where the clutch slides on. There are 10spline those are square teeth and there is 23 spline that are pointed teeth.

Back to the Archives