posted August 24, 2005 08:07 AM
ok I bought new mini stock and already slaped the wall a little coming off turn four after the race I notice I have more camber then before. I looked at everything and could not find nothing bent but I knew something was for the camber change. I took everything apart and the only thing that I found was ion the strut were it mounts to spindle the bracket was a little bent but should be fine. My question is can I just adjust it out at the top. I dont have a gauge can thius be done by looking at the tire and the leaning of it. If i just pull it out at top will it throw the caster out alot
MiPinto6 Dirt Maniac
Total posts: 118
posted August 25, 2005 09:49 AM
Without a guage it's a shot in the dark. How did you set it to begin with? Maybe someone has an idea of how to convert degrees to inches. If so, you can probably just use a vertical string to set camber but caster would be a problem I think.
------------------ Thanks, Rob (Cold Blooded Racing)
racerman707 Dirt Freak
Total posts: 374
posted August 29, 2005 04:11 PM
A new strut should put you back to where you were.