Visit The Dirt Forum for More Information

Author Topic:   compression? 2.3
bfx racing
Dirt Full Roller

Total posts: 42
posted May 26, 2005 06:31 PM  
What should a stock 2.3 have for compression in the cylinders?

What if it were done say 30 over .100 off the head, cam etc?

------------------
If it aint got a motor...it's not a sport

racerman707
Dirt Freak

Total posts: 374
posted June 01, 2005 10:10 AM  
Around 8.5-9 to 1 stock. Milling the head that much you'll be at around 10 to 1 depending on the head.

b4racing
Dirt Forum Champ
Total posts: 626
posted June 01, 2005 10:50 PM  
Racer is right if you was looking for a compression test there is too many variables. How charged is the battery what size of cam how good of rings etc.

Back to the Archives