Visit The Dirt Forum for More Information

Author Topic:   excess oil out of valve cover
bfx racing
Dirt Full Roller

Total posts: 42
posted May 22, 2005 10:18 PM  
I was wondering what trappers solution was to the oil blow-by... I read something about the sending unit... can anyone be more specific? sorry for the the repeat quest.

------------------
If it aint got a motor...it's not a sport

kurzhaar11
Dirt Roller

Total posts: 17
posted May 23, 2005 05:34 AM  
How 'much' is excess? I run a long hose (about 2 feet long) that hangs down behind the intake with a pcv valve in the end. It allows the top to 'vent, keeps dirt out, and allows any blowby to run out. I rarely get oil out the top and Im running about 70 of pressure cold. I do get a little out of the bottom vent.

rocket36
Dirt Freak

Total posts: 209
posted May 23, 2005 05:04 PM  
weld a fitting into both your valve cover and your sump (above oil level) and connect the 2 with some hose and appropriate fittings. still run the valve cover breather though.

Back to the Archives