Visit The Dirt Forum for More Information

Author Topic:   Celica gears
bigcityracer
Dirt Freak

Total posts: 431
posted April 10, 2005 07:21 AM  
Looking for 3.90:1 or 3.73:1 gearing for a 1984 Celica. Complete center or just gear set. bigcityracer@msn.com

rnoswal53
Dirt Maniac

Total posts: 120
posted April 11, 2005 04:32 AM  
Look at your other posting.

Russ

bigcityracer
Dirt Freak

Total posts: 431
posted April 11, 2005 05:32 AM  
Hey I have replied to the other post you left, thanks!

If it is a 6.7 in the celica will the 6.7 corolla gears work?? I tryed the hold carrier, but it does not bolt up.

quote:
Originally posted by rnoswal53:
Look at your other posting.

Russ



rnoswal53
Dirt Maniac

Total posts: 120
posted April 11, 2005 05:41 PM  
Hey again. According to my information all the rear drive Corolla's came with a 6.38" diameter unit. That is why it wouldn't fit. There is a Toyota van that has a 6.7" rear end but I can never find any plate to tell what the code for the rear gear is. I am sure it must be there somewhere though. I think you can pull the chunk out of the IRS Celica's from around 82 to 85, but I am not positive.

Good luck

Russ

bigcityracer
Dirt Freak

Total posts: 431
posted April 11, 2005 08:13 PM  
Thanks a lot!!! I thing that clears up a lot and i have no problem geting those gears.
My tag say T37, so it should be the 6.7 Thanks again!!

quote:
Originally posted by rnoswal53:
Hey again. According to my information all the rear drive Corolla's came with a 6.38" diameter unit. That is why it wouldn't fit. There is a Toyota van that has a 6.7" rear end but I can never find any plate to tell what the code for the rear gear is. I am sure it must be there somewhere though. I think you can pull the chunk out of the IRS Celica's from around 82 to 85, but I am not positive.

Good luck

Russ



rnoswal53
Dirt Maniac

Total posts: 120
posted April 12, 2005 05:52 AM  
T37, that is a 3.583 gear, 6.7"

Russ

Back to the Archives