Visit The Dirt Forum for More Information

Author Topic:   Mustang mini stock flywheel safety shield
jimshar
Dirt Full Roller

Total posts: 67
posted March 21, 2005 09:13 AM  
Does anyone out here know if someone makes a flywheel safety shield for the bellhousing on a 79-81 mustang? The track i am going to run at requires it.

Dunnracing98
Dirt Full Roller

Total posts: 63
posted March 22, 2005 01:14 PM  
i run a 3inch conveyor belt between my bell housing and the tunnel of the car we just bolted it to the tunnel might call the track and see if that would work it qualified at our track and we even tested it out and nothing came thru so thats what i suggest
quote:
Originally posted by jimshar:
Does anyone out here know if someone makes a flywheel safety shield for the bellhousing on a 79-81 mustang? The track i am going to run at requires it.


cagpinto racer
Dirt Roller

Total posts: 10
posted March 22, 2005 04:57 PM  
esslinger makes a scatter sheild for pinto and mustang they cost about 80.00 dollars.

jimshar
Dirt Full Roller

Total posts: 67
posted March 23, 2005 06:29 AM  
Thanks, just sent them an e-mail
quote:
Originally posted by cagpinto racer:
esslinger makes a scatter sheild for pinto and mustang they cost about 80.00 dollars.


okiepro4
Dirt Full Roller

Total posts: 44
posted April 12, 2005 06:16 PM  
Man a steel bellhousing would be nice.

dirttracker98
Dirt Freak

Total posts: 284
posted April 17, 2005 05:05 AM  
quote:
Originally posted by cagpinto racer:
esslinger makes a scatter sheild for pinto and mustang they cost about 80.00 dollars.

you can make the same thing in your shop at home that big E will sell you and save the $80.00 + shipping for something else for your racer.

Back to the Archives