posted March 17, 2005 06:40 AM
I am going to change my rear end gears (never done it before)is there anything I should look out for while I am doing this to make sure everything works right? Any help would be good.
Zypher Dirt Roller
Total posts: 22
posted April 16, 2005 06:17 PM
First take off the brake drums and loosen the bolts that hold the hub on. Loosen all of the 12mm bolts that hold the chunk in the rear end and after there all out have 2 people hold both axles out and hopefully it will slide out.. It could take some shaking. O yeah take the driveshaft loose first thing.