Visit The Dirt Forum for More Information

Author Topic:   clutch ?
cagpinto racer
Dirt Roller

Total posts: 10
posted March 01, 2005 08:10 PM  
what is the best light weight clutch assy to use on a pinto with a 2300. I ran a borrowed ram coupler last week. car was awesome off corners but very hard to use and start off. liner was worn out. would like a clutch that offers same performance but more user freindly.

Dirt Full Roller

Total posts: 44
posted March 02, 2005 06:10 AM  
It all goes to the money thing. How much money you willing to spend. Esslinger of course has the lightweight flywheels with the clutch for enough money you could buy a new car for. But speedway also has a good package for a not so bad price. I always just ran a lightweight flywheel with a stock clutch and it was always fine for me but everyone is different.

Dirt Forum Champ
Total posts: 626
posted March 02, 2005 08:29 AM  
contact gold star out of California. They are more than ram couplers but last a heck of a lot longer. They only weigh around 11.5lbs. The tilton is also a good clutch set up.

Dirt Roller

Total posts: 20
posted March 02, 2005 04:19 PM  
you can get the 6 pound flywheel and long throw out bearing at race engineering with a stock pressure plate and disc that works pretty good

Dirt Full Roller

Total posts: 63
posted March 05, 2005 02:24 PM  
i race with a clutch from race engineering and love it thats what i suggest a friend of mine races with a gold star and i tried it it was touchy

Back to the Archives