Visit The Dirt Forum for More Information

Author Topic:   flywheel and intake
jammin james
Dirt Maniac

Total posts: 118
posted January 29, 2005 03:46 PM  
guys i'm looking for a intake and flywheel for 2.5 Iron duke. we have 2 different intakes the good one is ported alot (illegal) and the other one looks like it wont flow near as well. don't know what either is off of. on the flywheel were allowed 16 lb min. and the one we have it has been turned down were the bolts had to be ground on but still is at 22 lbs . any ideas thanks

BIGG C
Dirt Maniac

Total posts: 114
posted January 29, 2005 04:05 PM  
Cut and or taper the back of the flywheel. We used to do this on buggs that only had about 40 HP. Big difference. Make sure that you keep your thickness with out any sharp radius. BIGG C

ss4dirtslinger
Dirt Roller

Total posts: 24
posted January 29, 2005 07:39 PM  
quote:
Originally posted by jammin james:
guys i'm looking for a intake and flywheel for 2.5 Iron duke. we have 2 different intakes the good one is ported alot (illegal) and the other one looks like it wont flow near as well. don't know what either is off of. on the flywheel were allowed 16 lb min. and the one we have it has been turned down were the bolts had to be ground on but still is at 22 lbs . any ideas thanks

i use the 85 s-10 flywheel and i dont know if you run the crossflow or not private email me wwhen you see this

Back to the Archives