Visit The Dirt Forum for More Information

Author Topic:   CAROLINAFAST
bigcityracer
Dirt Freak

Total posts: 431
posted May 31, 2004 12:00 PM  
How the changes work out? Need any other help?

carolinafast
Dirt Full Roller

Total posts: 72
posted May 31, 2004 12:36 PM  
we didn't run it this week.....ran pvmt (yuk!)....we are sure the changes will help
i'm going to pos a new topic concerning
which head to use and any other advice on stock 4 2300...any thoughts?

bigcityracer
Dirt Freak

Total posts: 431
posted May 31, 2004 01:38 PM  
Oval or D-port. slight port job and cut as much as you can off the surface that meets the block. Tell your machine shop cut as much as possible. Probably in the range of .090 to .140 off. Solid lifter cam. 500 CFM carb. Pending rules of coarse.

carolinafast
Dirt Full Roller

Total posts: 72
posted June 02, 2004 05:03 PM  
ok...sounds good ..the diff between oval and
D-port???

carolinafast
Dirt Full Roller

Total posts: 72
posted June 11, 2004 02:53 PM  
hey big ,the changes are working, we lead the heat race til we spun....broke a ball joint it came loose in the feature
our lap times are comparable to the leaders
will post later tonight..after the race

bigcityracer
Dirt Freak

Total posts: 431
posted June 11, 2004 03:42 PM  
Carolina!!
Great it sound like your getting close now. If ya need any further help or questions just ask.

Back to the Archives