Visit The Dirt Forum for More Information

Author Topic:   pro4
thebomb
Dirt Maniac

Total posts: 149
posted May 26, 2004 10:48 PM  
ok guys, im new to this pro4 stuff, i built my own chassis taking measurements off a latemodel and scaling down, now i need to know what shocks and springs(coil over) to work with, if i have to put it all together to give weights i will,

thebomb
Dirt Maniac

Total posts: 149
posted June 01, 2004 11:54 AM  
any ideas at all?? ill take any advice, using equal length 3bar, with a rubber bisquit pull bar

racerman707
Dirt Freak

Total posts: 374
posted June 01, 2004 02:25 PM  
I run a scaled down late model body BUT it's on a stock Mustang chassis. Wish I could help.

juliaferrell
Dirt Freak

Total posts: 370
posted June 07, 2004 08:22 AM  
What tire are you running?

dirttracker98
Dirt Freak

Total posts: 284
posted June 07, 2004 02:42 PM  
are you using coilovers/coilover eliminators or conventional springs & shocks.also is there any weight rule in effect at your track.what tires & rim width.

thebomb
Dirt Maniac

Total posts: 149
posted June 07, 2004 04:12 PM  
im looking at running coil overs, the tires and rims are 13' by 10"wide, i havent picked a tire yet that was going to be a latter question, we can run any tire we want and any offset we want, there is no weight rule

[This message has been edited by thebomb (edited June 07, 2004).]

[This message has been edited by thebomb (edited June 21, 2004).]

Back to the Archives