Visit The Dirt Forum for More Information

Author Topic:   Holley on a MGB
USAUS Racing
Dirt Full Roller

Total posts: 69
posted May 05, 2004 08:39 AM  
OK I have a MGB being set up for Mini that currently has a 32/36 Weber on it. So,can I get a manifold or adaptor to mount a Holley instead?? The Weber is nice but the delay in the second barrel opening is going to cause me trouble on starts.

b4racing
Dirt Forum Champ
Total posts: 626
posted May 05, 2004 12:18 PM  
you can get one from any parts store. I am not for sure but I think that might be over carburation for that mgb. Just my .o2. Kp or earl Parker would be good people to get advice from on this. Also check your pm.

racerman707
Dirt Freak

Total posts: 374
posted May 06, 2004 09:23 AM  
The weber can be modified to have secondaries open quicker.I agree with b4 on the overcarbed deal.

speedyd1
Dirt Maniac

Total posts: 170
posted May 06, 2004 11:06 AM  
i believe you are a bit misinformed about the weber. when properly setup they will run as well if not better than eithor of the two holleys. we consistently win with dgv5a 32/36 stock webers and have absolutely no problems competing with the others. email me @ speedyd1@aol.com and i'll supply you with some numbers to try. the webers are a bit better at high rpm's due to the holleys having pull over.

Back to the Archives