Visit The Dirt Forum for More Information

Author Topic:   2.3 HELP?
intimidtr3
Dirt Full Roller

Total posts: 74
posted January 26, 2004 03:01 PM  
I am going to build a motor using stock bottom,am going to mill head and am wondering what the biggest and torquest cam that I can get is using the stock bottom end.I will be running a Holley 350.thanks in advance.

bigcityracer
Dirt Freak

Total posts: 431
posted January 26, 2004 06:59 PM  
quote:
Originally posted by intimidtr3:
I am going to build a motor using stock bottom,am going to mill head and am wondering what the biggest and torquest cam that I can get is using the stock bottom end.I will be running a Holley 350.thanks in advance.


I like the esslinger solid lifter .465 lift. Ran very good for me on a stock bottom end. That was running 3/8 mile dirt track. Good luck.

b4racing
Dirt Forum Champ
Total posts: 626
posted January 26, 2004 07:24 PM  
call jerry at schnieder cams he will set you up with a good cam try a google search as they have a websight. I have ran various cams but once I tried a schnieder that is who I stick with. It might be ei instead of ie i always get it mixed up. YOu will want the centerline to be small like 104-106 106 is what I run. That is what determines the pull off the corner. Also esslinger is a good place if you can $$$ it. Later and good luck BObby

racerman707
Dirt Freak

Total posts: 374
posted February 03, 2004 06:24 PM  
WE RAN AN ESSLINGER 2232 ROLLER ON STOCK BOTTOM END ON 1/2 MILE AND WAS VERY STRONG!!!!!!!!!

Back to the Archives