Visit The Dirt Forum for More Information

Author Topic:   aluminum head for 2.3
tx58
Dirt Newbie

Total posts: 3
posted June 18, 2003 11:40 AM  
Hey guys, i'm new at this asking questions on a forum, but here it goes I'm looking for an aluminum head for a 2.3, but I don't want to spend $1400.00 for it from esslinger. I've been told that the 90's Ranger and some Mustangs have them on it! Any suggestions? Thanks

KSGerry
Dirt Freak

Total posts: 376
posted June 18, 2003 02:54 PM  
Sorry, someone gave you the wrong information. A stock Ford 2.3 sohc engine never came with an aluminum head. Your only option is a Ford Racing head (made by Esslinger) or to contact Esslinger directly.

Now if you want to visit about Ford's new dohc ALL-ALUMINUM 2.3 liter Duratec engine then you can ask me.
Regards,
Gerry

------------------
KSGerry

tx58
Dirt Newbie

Total posts: 3
posted June 18, 2003 04:39 PM  
KSGERRY, THANKS FOR ALL THE INFO. I WOULD LIKE TO LEARN MORE ABOUT THE ALL ALUMINUM HEAD YOU WERE TALKING ABOUT!!

THANKS,
CHUCK

MINI2.3DIRTRACER
Dirt Maniac

Total posts: 115
posted June 18, 2003 06:36 PM  
YA ME TOO, BREAK IT DOWN FOR US.
THX

KSGerry
Dirt Freak

Total posts: 376
posted June 18, 2003 06:53 PM  
Send me an email about this engine and I'll send you an "informational" brochure that I created with details regarding the current 2.3 dohc all-aluminum Ford-Mazda-Cosworth engine. It only weighs about 200 pounds!
Regards,
Gerry Dedonis
dedonis@kans.com
Kansas Racing Products Inc

------------------
KSGerry

MINI2.3DIRTRACER
Dirt Maniac

Total posts: 115
posted June 18, 2003 07:01 PM  
WOW, 200LBS??? WHAT THE HECK. WHAT DOES THAT GO ON?? I RUN A 2.3 LNG ROD BTM END, WOULD IT WORK?? MY EMAIL IS SDSLAUB@AOL.COM
THX

b4racing
Dirt Forum Champ
Total posts: 626
posted June 18, 2003 08:41 PM  
I do not believe that it will work with the older block. Bobby

tx58
Dirt Newbie

Total posts: 3
posted June 19, 2003 08:16 AM  
HEY GERRY,
THANKS FOR THE INFO!! I ONE THING TO SAY,
"WOW" THAT DUDE LOOKS MEAN!!!THANKS FOR THE INFO!!!

CHUCK

Back to the Archives