Visit The Dirt Forum for More Information

Author Topic:   D port intake
Trapper
Dirt Full Roller

Total posts: 64
posted February 25, 2003 05:45 PM  
Is there a D port intake that came on a 2.3 ford that is carburator compatible. I recently aquired a D port head that is built but the oval ports on my intake manifold is not matching well at all. The D port came off a fuel injected model and I didnt know if it came on a specific year of carb model.

Thanks for any advice.

b4racing
Dirt Forum Champ
Total posts: 626
posted February 25, 2003 07:14 PM  
yes there is but from what I have heard is to buy an adapter and use the fuel injected intake. Most of the 2.3 from around 81-84 I believe was d-port what If that had a efi head then it is prob. a closed chamber it will not flow as good as the earlier d-ports but you will have a lot more compression Bobby

SLEEPY GOMEZ
Dirt Freak

Total posts: 295
posted February 25, 2003 10:43 PM  
Hey trapper, call me at 863-607-5071 and I'll explain how to make a D-port manifold out of an oval port. Simple and cheap. J-B Weld and masking tape. SLEEPY

joeracer95
Dirt Roller

Total posts: 15
posted April 08, 2003 11:03 AM  
early model d ports around 85-88 will work bolt straight up to your carb.the later model efi intake will require a carb adapter.the most important is the runner length between the two.you should consider your camshaft duration and lobe centers.
Mark-fast forward racing engines

Trapper
Dirt Full Roller

Total posts: 64
posted April 08, 2003 10:29 PM  
I found one on a capri. It was a one barrell carb mounted on it but it was a d port intake. It is working great.BTW I think it was an 82 but not sure.

Thanks for the help

TRAP

Back to the Archives