Visit The Dirt Forum for More Information

Author Topic:   Honda mini stock
dirtcrx
Dirt Newbie

Total posts: 2
posted December 06, 2002 12:08 AM  
I'm currently running a Pinto 2.3L and was thinking about switching to a FWD car. Honda came to mind first since there are plently of after market parts available for those cars. Also plently at the salvage yards.
The question is which car would be good choice for 1/3 mile track. I was thinking toward Honda CRX with 16 valve 1.6L (D16A6) Just wondering if that engine would be comptetive with bigger cc's engine like my pinto 2.3L.
Track rules states stock engine only. We don't have pound per cc rule.


b4racing
Dirt Forum Champ
Total posts: 626
posted December 06, 2002 03:41 PM  
will your track allow multiple valve engines

dirtcrx
Dirt Newbie

Total posts: 2
posted December 06, 2002 05:27 PM  
Yes, my track allows DOHC engine, also allows fuel injection but no one is using those kind of engine.

kar08
Dirt Full Roller

Total posts: 48
posted December 06, 2002 11:46 PM  
I have an 87 Si 1.5 12 valve sohc. Will have it on the track next season. What all can you do to them at your track??

[This message has been edited by kar08 (edited December 06, 2002).]

SKULLHULL
Dirt Full Roller

Total posts: 69
posted December 07, 2002 12:17 PM  
YES IT WOULD BE VERY COMP. FWD CARS ARE FASTER THAN RWD WE HAD A HONDA WITH A 1800 CARB AND IT WON RACES WE ALSO HAD A TOY COROLA WITH 1600 THAT WON SOME.
GOOD LUCK

bbchs
Dirt Full Roller

Total posts: 32
posted December 09, 2002 06:35 PM  
Last year at our track a 90 acura integra was the fastest car. I ran a Toyota Celica and if I could do it over I would look for a 91ish prelude with a 2.3. Front wheel drive with a big engine.

Good luck...Chuck

Back to the Archives