Visit The Dirt Forum for More Information

Author Topic:   Ford 2.3 L ?'s
Get_Slicked
Dirt Newbie

Total posts: 2
posted May 03, 2002 12:00 PM  
Hey guys, I'm new to this forum, but any of your input would be much appreciated.
Our local track is a 3/8 high bank oval, and we run a cruiser class (almost the same as pure stock). I've ran FWD's, RWD's and most recently have changed over to running a Mustang III Body with a 2.3 Litre. What Cam would you recommend on a head that has been decked .115 - .130? I was looking at the Racer Walsh 3A with their steel insert followers; I also know that a Ranger header will bolt on, What kind of a power increase would that give? If anyone knows where else to look for info, like 2.3 L sites or whatever, it would be greatly appreciated. Thanks.

AJ GARBE70
Dirt Freak

Total posts: 203
posted May 03, 2002 01:11 PM  
welcome to the sight there is another sight to go to for 2.3 like you asked www.raceeng.com they have some cams and some prettey good ones to

------------------

BIGG C
Dirt Maniac

Total posts: 114
posted May 03, 2002 02:51 PM  
Go to 4M.net they have helped a lot of people and have run off a few. Right AJ? Glad to see you learning and running better. BIGG C

KWTracer
Dirt Freak

Total posts: 233
posted May 03, 2002 04:11 PM  
Contact Richard Johnson (Johnson Machine), or Schneider Cams. The 3A is a pretty good cam also. www.Johnsonmachine.com (864-697-6067) www.schneidercams.com

dirttracker98
Dirt Freak

Total posts: 284
posted May 13, 2002 10:10 AM  
you can also try Esslinger Engineering,they can get you going in the rite way cam wise..

Back to the Archives