Visit The Dirt Forum for More Information

Author Topic:   getting a pinto rear end to set down
dtr21
Dirt Maniac

Total posts: 101
posted April 22, 2002 02:10 PM  
Hey all,
Started season and am having trouble with the rear of my car sliding in the corners. we run straight stock chassis 3/8 mile semi banked. Any comments would be greatly appreciated.
thanks
Dtr21

KWTracer
Dirt Freak

Total posts: 233
posted April 23, 2002 09:23 PM  
I know I ask this alot, but its important. Do you have any weights and percentages? Try to get the car scaled. You can go changing things by trial and error, but its much easier to know what to do or how a change will affect the car if we know where you stand now. As far a sliding in the corners... Are you loose in.. Good in and loose in the middle, or loose off?

dtr21
Dirt Maniac

Total posts: 101
posted April 24, 2002 11:56 AM  
We do not have the percentages or weights, I may be able to get them from my mechanic. the car goes into the turns well it just seems to get loose coming off the turn.. usually just tight turns as well.. turn four on almost all the tracks I run..
thanks
DTR21

Back to the Archives