Visit The Dirt Forum for More Information

Author Topic:   camshaft
#36 mini
Dirt Newbie

Total posts: 3
posted December 05, 2000 09:33 PM  
Hello would anybody have an idea on what type cam would be good for a 1/4 mile semi banked dirt track would be . I have 2.3 ford fox body mustang with auto trans 350 cfmholley and a header.
thanks for any help and THE DIRT

------------------
dirt track

AWSOME4
Dirt Full Roller

Total posts: 60
posted December 06, 2000 06:19 PM  
I RAN A RACER WALSH STAGE 2 AND IT PERFORMED VERY WELL .YOU CAN USE STOCK VALVE SETUP.THE ONLY PROBLEM IS POWER BAND IS FROM 3500 TO 7200 RPM.THE AUTOMATIC TRANS WILL TEND TO CAUSE A BOG BECAUSE THE STOCK STALL IS TO LOW .STOCK STALL IS AROUND 1800 I THINK .IT WOULD BE BETTER IF YOU HAD A 4 OR 5 SPEED TRANS.
AWSOME4

#36 mini
Dirt Newbie

Total posts: 3
posted December 16, 2000 12:02 PM  
The trans has a stock convertor and I run 1st gear and I am turning about 6000 rpms
I have been told that the auto trans has a 2.46 1st gear ratio but I need a 8" conv. w/about 300 rpm stall so I can liten up and use some trans brake going into the corners any ideas thanks

Back to the Archives