Visit The Dirt Forum for More Information

Author Topic:   width of late model
shorthose55
Dirt Roller

Total posts: 14
posted December 15, 2005 09:14 AM  
Having a flatbed trailer custom made and needed the width of the average late model..want to make sure if we move to the late model we have trailer wide enough to accept it..

thanks
Wendell

FATBOY90
Dirt Full Roller

Total posts: 68
posted December 15, 2005 09:40 AM  
76'' to 82''

shorthose55
Dirt Roller

Total posts: 14
posted December 15, 2005 10:05 AM  
very helpfull...thanks

bizkit
Dirt Maniac

Total posts: 143
posted December 15, 2005 10:33 AM  
You better make it 90+" between the fenders unless you want to scratch your lettering off..I know this makes the trailer illegal, so I would make ramps that go over the fenders...These type trailers also have a much better re-sale value

NJantz
Dirt Forum Champ
Total posts: 779
posted December 15, 2005 10:56 AM  
I don't think you'll get any dirt latemodel on even the widest legal trailer with out a load tire on the frontend. Rampovers are what you have to go to if you want to be legal.

[This message has been edited by NJantz (edited December 15, 2005).]

cbr310
Dirt Roller

Total posts: 7
posted December 19, 2005 04:13 PM  
Removable fenders would work also.

jeff woodson
Dirt Full Roller

Total posts: 44
posted December 22, 2005 07:30 PM  
I have a 28 ft Pace Enclosed, 8.5 ft wide, i only need to remove one of the cables on the loading ramp and my Rocket fits with no problem. However its a close fit between walls and the sides of the car, but still its fine. Hope this is some help

Back to the Archives