Visit The Dirt Forum for More Information

Author Topic:   late model setup
RattlerZ
Dirt Newbie

Total posts: 4
posted July 11, 2005 08:28 PM  
can anyone help me with a basic setup for a rayburn latemodel? z link on both sides? cant get any bite when track is black slick. i need help

Ells949
Dirt Full Roller

Total posts: 28
posted July 12, 2005 07:18 AM  
quote:
Originally posted by RattlerZ:
can anyone help me with a basic setup for a rayburn latemodel? z link on both sides? cant get any bite when track is black slick. i need help

What is your starting set up? Starting conditions early on through the night and your set up during black slick conditions.

GO 24
Dirt Freak

Total posts: 366
posted July 12, 2005 10:03 AM  
This was our Rayburn set-up:
lf 500 rf 450-500
lf 275 rr225

lf 7500 rf 7600
lr 9400 rr 9400

green spring (900lbs) in the pullbar with 10-15 degree down angle

90/10 shock up 3-5 degrees

1/4 rear steer (trail rr)

J bar should have 6-8in of rake

4-5in stagger in the rear

put lead low and in the center/tunnel

53% left 56% rear 100lbs bite

*our Rayburn was the "low scrub" front end/charcoal spindles and short rear bars.



bp22m1
Dirt Full Roller

Total posts: 69
posted July 13, 2005 09:53 PM  
what about being tight in the center or almost perfect in the center but loose off? is that too soft of a right rear spring?

Back to the Archives