posted February 20, 2005 12:30 AM
Will someone please let me know what lenghts the left bars and right swingarm need to be? We have a limited latemodel 2900lb rule. The pull bar is one of the Afco 2 spring models. Left side is bird caged, swingarm on right is not- will this affect it? Thanks for helpin'!!!
dan murray Dirt Full Roller
Total posts: 34
posted February 20, 2005 01:00 AM
Oh yeah, we are going to change the panhard bar from rear mounted to J bar on pinion mount to left frame- what angle of rake should we start with?
rocket36 Dirt Freak
Total posts: 209
posted February 20, 2005 06:58 AM
most manufacturers usually start you out with around 5" of rake in the j-bar, with it mounted at the same height as the centre of the pinion yoke and 5 inches higher on the frame. you will most likely have to adjust that to suit your track though. as for the bar/swing-arm lengths, i don't know.