posted July 22, 2004 01:07 PM
when i scale the car and get 50% cross 58% ls & 50% back weight is it ok that i have the same weight front and back (lf 870 lr 870 rf 630 rr 630) the car is 2999 thanks!
2nd2none Dirt Forum Champ
Total posts: 755
posted July 22, 2004 05:43 PM
are you scaling the car with the driver in?
If not your numbers are WAY off. Most chassis builder recommend scaling without the driver. 53% LS, 54-60% rear. Rear percent all depends on what type of track you run on and the amount of tire the car has under it. Normally a latemodel runs around 54-56% rear, the smaller the tires the more rear you run to hook the car up.
rfriellymotorsports Dirt Full Roller
Total posts: 44
posted July 23, 2004 12:12 AM
If you are scaling without the drive or even with the drive you got one **** of a heavy car.......
------------------ R.F.Rielly Motorsports 21 Blood Sweat and Beers