Visit The Dirt Forum for More Information

Author Topic:   I need brake help!
Greggie
Dirt Freak

Total posts: 298
posted May 05, 2004 12:47 AM  
Guys, what master cylinders should be on my late model. I'm driving this car that was purchased as a roller that needed only a motor. I have now driven it and I think it may have the wrong M/C's on it... Or at least one of them is wrong. I've got all of the rear cranked into it and it still won't get loose going in on the brake.


Thanks,

Greg

speedy79
Dirt Forum Racer

Total posts: 92
posted May 05, 2004 03:32 AM  
I put 1 inch bore Howe master cylinders on mine, I have good brakes. Using Dynalite calipers.

GO 24
Dirt Freak

Total posts: 366
posted May 05, 2004 09:54 AM  
Don't take this personal but have you double checked to make sure something isn't bound up?

NJantz
Dirt Forum Champ
Total posts: 755
posted May 05, 2004 11:53 AM  
A smaller bore master cylinder would generate higher system pressure resulting in greater breaking forces.

mod70
unregistered Total posts: 755
posted May 05, 2004 02:00 PM           send a private message to NJantz   Edit/Delete Message   Reply w/QuoteBBBBBB
Had the same problem on my mod last year. Get ya a rebuild kit for your MC's. They're really easy to rebuild.

zeroracing
Dirt Forum Champ
Total posts: 1876
posted May 05, 2004 02:05 PM  
move the 9010's to the left.

Greggie
Dirt Freak

Total posts: 298
posted May 11, 2004 05:28 PM  
Thanks for the sug's... I have ALWAYS run 1" and 7/8" M/C's on my mods... This thing has dual 7/8" m/c's on it. I'm going to put some guages on it and try rebleeding the rears... It doesn't look like anything is bound up, but it looks like there is a possibility that one of the calipers is not working 100%. I'll try it and get back to you.

Back to the Archives