posted November 11, 2003 11:36 PM
How do you all do your removable front fenders?? 2 dzus buttons on the sides and two on top?? Also, how do you attach your skirts to where they are removable?? Thanks again.
------------------ Just a little crazy!!!!!!
GO 24 Dirt Freak
Total posts: 366
posted November 12, 2003 12:11 PM
That's how I do mine Jon, I rivet the fender side to the fender top, use a dzus to attach the fender side to the door side, and then 4 dzus's for the fender top--if that makes any sense. My fender sides are more of a triangle (short) pattern and the actual door is what comes down to the bottom of the car so I never remove the plastic, as for the elephant ears....I just use rivets and pop them out whenever I remove the fender.
dirtrace54 Dirt Maniac
Total posts: 192
posted November 12, 2003 09:03 PM
Ours have an extra strip of tin on the back of the fender's side. The door slides in between the two pieces and the top front of the fender is a lil long and slides under the nose. Only one duz is used by using the nose wings tip down to the fender. If this is confusing, i'll try to get a pic. This is done by a professional. hope this is understandable.