Visit The Dirt Forum for More Information

Author Topic:   Appleton Power Rack Question for someone.
Dirt Administrator

Total posts: 6243
posted July 26, 2003 04:55 PM  
I believe (going by memory) the left rear goes to the pump and the left front is the return, you can hook them up wrong and you won't hurt anything (except maybe your wrist when you attempt to turn the wheel) as long as you check it in the shop.

Dirt Roller

Total posts: 8
posted July 30, 2003 04:58 AM  
If you look directly under the fittings that go into the rack for the lines there should a T stamped by one of them and that line goes to the tank

Dirt Full Roller

Total posts: 51
posted July 30, 2003 09:03 AM  
I was wrong above, they go just the opposite, assuming you have the newer style design. sorry

Dirt Newbie

Total posts: 3
posted August 07, 2003 11:43 AM  
Originally posted by jammin:
I purchased a used race car with an appleton power rack. Which fitting do I hook to the pump and which is the return? Thanks for your help. Roy Smith

Can anyone help me by emailing this guy with some help? He emailed me and I am not familiar with these. Thanks in advance!!!!


The ports are stamped w/"p" for pump & "t" for tank.

Back to the Archives