posted January 31, 2003 07:19 PM
hey guys i tore my car all the way down this year. i put it all back together, put my new motor in it crank it up and put the steering wheel on it and turn the wheel. car was still on the jack stands and all of a sudden the wheel turned hard to the right by itself and stayed there. i cut the motor off and its fine. what would cause this. its a appleton rack./
racerwilson Dirt Freak
Total posts: 357
posted February 01, 2003 08:16 AM
You have to pressure line and the return lines crossed. this can also cause damage to your power steering unit. Check all lines and correct then restart. Hope you get lucky. I had to send my steering back for a rebuild right after it was just done.