Visit The Dirt Forum for More Information

Author Topic:   rayburn
my97lm
Dirt Newbie

Total posts: 2
posted February 21, 2002 09:51 PM  
i have a 99 rayburn i need measurements on the rear end of where it sets in the car as far as left an right an how long my panhard bar should be i would be thankful of any help i can get

Ells949
Dirt Full Roller

Total posts: 28
posted February 22, 2002 08:50 AM  
99 Rayburn uses a 34-36 rear.To center in car measure from rotor to frame on both sides.You will want rear 1 inch farther to left.Start with the panhard bar at centerline of axle and same height above ground at frame.Get a warthog axle mount and panhard bar for a 99 Rayburn.

my97lm
Dirt Newbie

Total posts: 2
posted February 22, 2002 08:21 PM  
quote:
Originally posted by Ells949:
99 Rayburn uses a 34-36 rear.To center in car measure from rotor to frame on both sides.You will want rear 1 inch farther to left.Start with the panhard bar at centerline of axle and same height above ground at frame.Get a warthog axle mount and panhard bar for a 99 Rayburn.


Back to the Archives