Visit The Dirt Forum for More Information

Author Topic:   Setup
Dan Royal
Dirt Roller

Total posts: 11
posted June 25, 2000 10:45 PM  

Caster and camber checks out good! Everything is the same and seems to work good .This new spindle is same as old one except for the steering arm is angled outward alot more and i was told it would work better. This slipout started after this change.Was told this new angle would add akerman at left front so it would turn at more degrees than right front and make car drive corners better. Thanks DR21

jammin
Dirt Administrator

Total posts: 6243
posted June 25, 2000 10:55 PM  
Dan, I would try softening both right side springs 50lbs and if you have any bolted on ballast raise it about a foot. That should make a noticeable difference.

Back to the Archives