posted November 22, 2005 04:41 PM
We have a 89 Dodge 1 ton van that we tow with. It was cheap. Pulls very well,plenty of power, but crosswinds and curves are a little rough. I replaced tierod ends and draglink, drives better. Has anybody tried a rear swaybar ? If so what did it come off of? Thanks BIGG C
deasley Dirt Full Roller
Total posts: 55
posted November 27, 2005 01:08 PM
I HAVE BEEN AROUND THE DODGES FOR EVER AND YOUR PROBLEM LYES IN THE SLIP JOINT ON THE STEERING SHAFT. REPLACE THE WHOLE JOINT ASSEMBLY AND YOUR PROBLEM WILL GO AWAY. DODGES ARE BAD ABOUT THIS WHEN THE SLIP JOINTS GET A LITTLE SLACK. YOU CAN GET THEM AT ANY DODGE DEALER. HOPE THIS HELPS YOU.
[This message has been edited by deasley (edited November 27, 2005).]