Visit The Dirt Forum for More Information

Author Topic:   2.08 intake valve too big for 350 cfm carb
strstckracer
Dirt Roller

Total posts: 25
posted December 24, 2005 09:31 PM  
I was just wondering if a 2.08 intake valve in 200 cc Sportsman II head is to big? The carb is mandated 350 cfm Holley. The motor would be a 12.3 406 with 5.7 rods. The cam is .544/.544 with adv duration of 282/282. Intake is a four barrell low rise with some port work.

Is it possible to put some sort of epoxy on the head and make it a 2.02 or 2.05?

Back to the Archives