Visit The Dirt Forum for More Information

Author Topic:   dome question
28 T
Dirt Full Roller

Total posts: 40
posted December 20, 2005 09:50 PM  
with a 76cc head would I have clearance problem out of a .275 dome piston

johder
Dirt Maniac

Total posts: 189
posted December 21, 2005 04:51 AM  
depends on if its decked, or if the heads been shaved. only way to really tell is to assemble it and use dial indicators, or the old method of clay.

That way you know for sure. Hope that helps.

Depends on what cam too, some huge came is obviously pushing hte valves closer

rico 08
Dirt Forum Champ
Total posts: 1143
posted December 21, 2005 06:59 AM  
I ran a .500 dome on a 355 with 76cc heads,had plenty of clearance.

dirttrackin94
Dirt Maniac

Total posts: 132
posted December 21, 2005 08:06 AM  
LIKE JOHDER SAID YOU WONT KNOW FOR SURE UNTIL YOU KNOW IF HEADS OR BLOCK HAVE BEEN SHAVED,IF THEY HAVENT BEEN THEN YOU WILL HAVE NO PROBLEM,IF THEY HAVE BEEN A LITTL THEN I SEE NO PROBLEM EITHER.

Back to the Archives