Visit The Dirt Forum for More Information

Author Topic:   Cast Iron Heads from Austrailia?
Koolaid
Dirt Maniac

Total posts: 104
posted December 01, 2005 07:59 PM  
Has anyone heard of some "Vortec" heads out there that are being cast over in Austrailia, have a little bigger runners then a stock Vortec, and have 2.02/1.60 valves to start with? I found a set, but don't know how they flow - seems like they address all of the shortcomings of the stock vortecs.

brent07
Dirt Roller

Total posts: 19
posted December 02, 2005 04:54 AM  
yes the heads are made by pro lightning which was just bought out by comp cams they even have a stock casting number on them as far as the head some ppl love them some ppl hate them

Koolaid
Dirt Maniac

Total posts: 104
posted December 02, 2005 06:36 AM  
Oops - sorry I should have clarified that. No I'm not talking about any of the Pro Topline heads - these are more or less a no name through a distributor. I thought they were RHS/Pro's at first also.

rocket36
Dirt Freak

Total posts: 231
posted December 02, 2005 03:00 PM  
i live in australia, and i have to admit i know nothing about these. i'm not even sure what vehicle they would have come out on.
the only vortec heads i've seen have been on direct imported US pickups like our GMC, and on used US imported engines.
I would be interested to know more about these if it is true.

the Pro Topline heads were designed & manufactured in New Zealand not Australia.

KPLugnut
Dirt Forum Champ
Total posts: 1025
posted December 02, 2005 08:36 PM  
www.eqcylinderheads.com www.lightningcylinderheads.com

Are those the ones you're talking about?

KP

[This message has been edited by KPLugnut (edited December 02, 2005).]

Koolaid
Dirt Maniac

Total posts: 104
posted December 05, 2005 07:11 PM  
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8018824276&sspagename=STRK%3AMEWA%3AIT

There is the link to the set I was looking at. They are also making them in aluminum. At first glance it's like they solved every problem known to Vortec-dom, but they don't have any flow numbers so I have no idea if they are good or not. Thoughts?

Back to the Archives