Visit The Dirt Forum for More Information

Author Topic:   HORSEPOWER?
tumbleweed18
Dirt Newbie

Total posts: 3
posted November 05, 2005 01:33 PM  
HI GUYS i HAVE A 350 BORED .060 OVER 12.1 DOME PISTONS 750 ALKY CARB TEAM G INTAKE BRODIX TRACK 1 HEADS AND MID RANGE CAM. I'M LOOKING FOR A BALL PARK ON APPROX. HORSEPOWER.MOTOR WILL BE IN A MOD.THANKS

stevenm
Dirt Full Roller

Total posts: 43
posted November 05, 2005 03:52 PM  
I have never liked a 60 over motor the cylinder walls are to thin and they run hotter than a 30 over.

Thats just my opinion though.

Steven.

2nd2none
Dirt Forum Champ
Total posts: 755
posted November 05, 2005 04:59 PM  
I would say probably around 550-575 HP

Racer111
Dirt Freak

Total posts: 259
posted November 05, 2005 05:12 PM  
I would say 475-500 tops.

dirttrackin94
Dirt Full Roller

Total posts: 65
posted November 06, 2005 09:04 AM  
racer111-the brodix heads will pull 500hp easily...

tumbleweed,your looking at around 575hp,could be more could be a little less depending on alot of variables..

plenty of motor for a mod!

tumbleweed18
Dirt Newbie

Total posts: 3
posted November 06, 2005 12:40 PM  
thanks for the help guys .this will be my first motor for a mod

dirtbuster
Dirt Forum Champ
Total posts: 2007
posted November 07, 2005 04:38 AM  
at only 12:1 i dont think youd have much chance of getting over 525 with a 350, and more important your torque will be way down. Id try to get it up to 13:1+ to start with.

[This message has been edited by dirtbuster (edited November 07, 2005).]

dirttrackin94
Dirt Full Roller

Total posts: 65
posted November 07, 2005 04:46 PM  
i know of many 355-362 engines that pull over 575hp with brodix heads,with 12:1 compression.i dont think this one would be over 575hp,but i bet it is pretty close in the area of!

Back to the Archives